Marcador de cables (Identificación Termorretráctil mangas ).

Halogen free identification sleeves are designed to meet the wire and cable marking needs of manufacturers with high performance requirements. Made from permanent, flame retarded, radiation cross-linked heat-shrinkable polyolefin...

Identification sleeves meet the requirements of UL 224.

It has two expansion ratios, both 2: 1 and 3: 1 shrink ratios are available, see table 1 to table 4.

RSFR-CB and RSFR-H are permanent immediately after printing and remain legible even when exposed to abrasion, aggressive cleaning solvents.

The 2: 1 products provide a thick, rugged sleeve wall and are particularly easy to handle. The lightweight 3: 1 products provide extremely fast shrinking and cover a wider range of wire diameters, thus simplifying inventory.

The marker sleeves are designed to be printed by computer-driven heavy duty dot matrix, thermal transfer printers and laser graver printers providing several advantages in terms of reduced errors, cycle time and cost.

Supplied in a thin, flatten cartridge belt format, the sleeves are held horizontally between two hole-punched polyester strips. This configuration feeds directly from the storage box into a recommended Wolabel lprinter and the recommended Wolabel ribbons should always be used. The cartridge belt format provides automatic kitting of the marker sleeves in the desired sequence. A standard heat gun with reflector is used to shrink the sleeves onto the wire or cable.