DM500S DVB-S con CCvam & TC500S

Tenson 500S (TC500S)
Dimensions(L x W x H): 260x180x40mm
Weight: 1.5KG
Powerful satellite receiver for digital TV and Radio programs. Main features are a 200 MHz STI5105 PowerPC

Attention: This receiver can share card with IP, we can offer the technology of how to build a share server!

Features:
1) 200 MHz STI5105
2) 1 x Smartcard-Reader
3) MPEG2 Hardware decoding
4) 100Mbit full duplex Ethernet Interface
5) 2 LED status
6) Unlimited channel lists for TV/Radio
7) Channel-change time < 1 second
8) Full automatic service scan
9) Supports directly bouquet-lists (indirect unlimited)
10) Supports EPG (electronic program guide)
11) Supports multiple LNB-Switching control (supports DiSEqC)
12) Fully adaptable OSD in many languages (skin-support)
13) SPDI/F Interface for digital bit stream out
14) Components out put: Y, Pb, Pr

Technical Specification:
DBS-Tuner:
Frequency Range 950 ^. 2150 MHz
Signal Level - 65 dBm ^. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 ^. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4: 3 / 16: 9
Footage 16: 9, automatic assimilation for 16: 9
Letterbox precolating for 4: 3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 KHz, 44.1 KHz, 48 KHz, 16 KHz, 22.05 KHz, 24 KHz
Output analog:
Output Level L/R 0, 5 Vss on 600 Ohm
THD > 60 dB (1 KHz)
Crosstalk < -65 dB
Output digital:
Output Level 0, 5 Vss on 75 Ohm
Sampled Data Filtering 32 KHz, 44.1 KHz, 48 KHz
S/PDIF-Output optical (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115, 2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming
Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming
LNB Power and polarisation:
LNB Current 500mA max.; Short-circuit-proof
LNB Voltage vertical < 14V without load, > 11, 5V at 400mA
LNB Voltage horizontal < 20V without load, > 17, 3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Input voltage: AC90~240V,
Extern power supply:
Input: 110-240V AC / 50-60Hz