Rotary las rebabas de molienda de hierro fundido (T1205M06)

Rotary las rebabas de hierro fundido Pulido(T1205M06)
La mayoría de la profesión de corte de carburo rebabas fabricante.
Personalizar es bienvenido.
Excelente equipo, servicio postventa responsable.


Identificar el tipo correcto de corte para adaptarse a los materiales y necesidades.

--Single cut:

mano derecha de la flauta de espiral.

Uso general en hierro fundido, acero, aleaciones de cobre y latón.

Diseñado para la rápida eliminación de existencias y excelentes acabados de superficie.

--Corte doble:

derecho e izquierdo de flautas combinadas para producir super suaves acabados.

Una ligera acción de corte izquierdo excelletn da el control de la rebaba y muela.

El carburo de tungsteno Burr, utilizado para moler/sharping todos los aceros duros como el acero inoxidable, hierro fundido, aleaciones de cobre, aleaciones de níquel, aluminio, así como de maderas duras, las partículas de cartón, plástico, laminados, fibra de vidrio y metales no ferrosos (latón y cobre), diseñado para una rápida retirada del material, adecuado para el aire y las herramientas de la energía eléctrica de

las principales características de la rotativa de carburo de archivo son como sigue:

1. Puede ser utilizado en la máquina varias metal (incluyendo todo tipo de aceros de enfriamiento) y metaloide materiales (como el mármol, jade y el hueso) con la dureza de la pieza mecanizada
2. Replace small grinding wheel with shank for a majority of work without dust contamination;

3. Giving good machining quality and high smoothness, it can be used to process mold cavities of various forms with high accuracy;

4. Enjoying a long service life, it is 10 times than the high-speed steel cutter and more than 200 times the small grinding wheel in durability;

5. It is easy to grasp and operate, safe and reliable. It can be reduce labor intensity and improve working condition;

6. With high economic benefit, it may have 10 times reduction in cost of comprehensive process. Generally, the carbide rotary file is driven by a hand electric or pneumatic tool (can also be used in machine tools).

Usually, the rotary speed of an electric or pneumatic tool is between 6, 000~50, 000 rpm.

The file must be correctly clamped during operation. To avoid repeated advance of too, the cutting mode of reverse milling is preferred. Wear protective spectacles to prevent flying cutting bits during operation.

Instructions for users:

1 Must clamp cutter tightly, and not let the handle of the cutter reach the bottom, avoiding the problem of askew of concentric degree because of uneven bottom.

2 While cutting move the burs evenly from right to left, but not left to right again. Pay attention to exerting pressure too much, usually not exceeding 4kgs.

3 It should not be too fast when the cutter touch the workpiece to prevent gear bursting.

4 In order to avoid cutter rupture or bend, when the cutter is working, it is forbided to impact other things.

5 When using it for oxide or shaggy things, you'd better use old one to get rid of surface at first, then use the new one. Then could prolong the use time.


Applications of the carbide rotary file:

1 Trimming flash edges, burrs and welding lines of casting, forging and welding parts;

2 Finish machining various kinds of metal molds;

3 Finishing cast gates of vane wheel;

4 Chamfering, rounding and channeling of various kinds of machinery parts;

5 Finish machining the surface of inner bore of machinery parts;

6 Artistic engraving of all kinds of metal or nonmetal parts.