Inicio
Directorio de Producto
Equipo y Componentes Industriales
Equipo de Soldadura
Soldador a Tope
Descripción de Producto
Información de la Compañía
Descripción de Producto
This unit contains one bearing frame, multi-component clamp adapters, one Milling cutter, one heating plate, one Milling cutter/heating plate support, one Electro Hydraulic unit, one tool bag and introduction brochure.
@The KM- 315can weld fittings without the need for any additional equipment: Bends, tees, branches and flange necks can be welded by simply taking the fourth clamp off the machine bodys frame.
@There is independent temperature monitor on the heating plate which complies with international standards.
@Digital pressure measure and display, Has avoided disease that the mechanical pressure gauge at high, the low end measuring range are big error.
@Dragging pressure can be measured and added to the total pressure of welding process
@Electrical equipment complies with IEC60204-1: 1997
@Parameters of pressure, temperature and time can be set and stored for long time. There are English and Chinese languages.
@Digital LCD screen displays pressure, temperature and time normal value and their operating actual value. Digital LCD screen displays the writing prompt in welding process, There are English and Chinese languages
@Flashing lights work as reminder during operation.
@"Manual" and "automobile" are optional of the timer starts the way, while it is set as automobile initially.
@The milling cutter has conveniently, the nimble automatic locking unit. The milling cutter is attached to a Spacing contact switch that it is limited in working area allowable.
@The operating power ranges in 110V, 220V and 240V. Its tolerance is 10, frequency is 50HZ, 60HZ.
1
@Its latest six electrical accidents will be recorded and accidents over power scope will be monitored.
@Temperature sensors of "PT100 OC" and PT100 SC"will alarm and display.
@Heating plate is protected at the maximum temperature to protect PTFE coating
@The time and date will be displayed.
@It is friendly use. Pressure downing, switching and raising can be operated easily.
@Standard clamp adapters: 90\110\160\200\250\315
@clamp adapters arrangement: 125\140\180\225 \280 including bending clamp adapters
@Power: 220V/Single phase/50-60Hz/5500W
@Welding materials: PE\PP\PVDF\PB
@The KM- 315can weld fittings without the need for any additional equipment: Bends, tees, branches and flange necks can be welded by simply taking the fourth clamp off the machine bodys frame.
@There is independent temperature monitor on the heating plate which complies with international standards.
@Digital pressure measure and display, Has avoided disease that the mechanical pressure gauge at high, the low end measuring range are big error.
@Dragging pressure can be measured and added to the total pressure of welding process
@Electrical equipment complies with IEC60204-1: 1997
@Parameters of pressure, temperature and time can be set and stored for long time. There are English and Chinese languages.
@Digital LCD screen displays pressure, temperature and time normal value and their operating actual value. Digital LCD screen displays the writing prompt in welding process, There are English and Chinese languages
@Flashing lights work as reminder during operation.
@"Manual" and "automobile" are optional of the timer starts the way, while it is set as automobile initially.
@The milling cutter has conveniently, the nimble automatic locking unit. The milling cutter is attached to a Spacing contact switch that it is limited in working area allowable.
@The operating power ranges in 110V, 220V and 240V. Its tolerance is 10, frequency is 50HZ, 60HZ.
1
@Its latest six electrical accidents will be recorded and accidents over power scope will be monitored.
@Temperature sensors of "PT100 OC" and PT100 SC"will alarm and display.
@Heating plate is protected at the maximum temperature to protect PTFE coating
@The time and date will be displayed.
@It is friendly use. Pressure downing, switching and raising can be operated easily.
@Standard clamp adapters: 90\110\160\200\250\315
@clamp adapters arrangement: 125\140\180\225 \280 including bending clamp adapters
@Power: 220V/Single phase/50-60Hz/5500W
@Welding materials: PE\PP\PVDF\PB
Dirección:
29,Xinfeng Road ,Wuxi New District, Wuxi, Jiangsu, China
Tipo de Negocio:
Fabricante/Fábrica
Rango de Negocios:
Maquinaria de Procesamiento
Productos Principales:
Soldadura por fusión a tope, soldadura por fusión a tope con tubo de plástico, soldadura por fusión a tope de PE
Introducción de Empresa:
Wuxi Weld Technology CO., LTD, ubicada en la Zona de Desarrollo Industrial de Alta Tecnología de Wuxi, está dedicada a la investigación, diseño y fabricación de equipos de soldadura por fusión de tubo plástico, proporcionando un servicio completo de pre-venta, venta y servicio de post-venta. La empresa cuenta con un equipo experimentado de empleados de know-how y auto-motivación para perseguir la creatividad y satisfacer las necesidades del mercado. La compañía proporciona equipos de soldadura por fusión de alta tecnología, alta rendimiento y alta calidad en el mercado. La compañía se guía por la ideología de "la ciencia y la tecnología determinan el futuro. " la meta de calidad es "esforzarse para continuar con el éxito. " los productos líderes son soldadores de fusión de culata, máquinas de soldadura de fusión de montaje, sierras de banda. Los modelos disponibles actualmente son la soldadura por fusión de tope con control electrohidráulico, la máquina de soldadura por fusión automática, la máquina de soldadura por fusión de ajuste automático; la sierra de banda automática.
