Shunt Reactor Disk Cutting Length Line

• After-sales Service: on Site Debugging and Training
• Type: Silicon Steel Cut to Length Line
• Drive Mode: CNC
• Warranty: 2 Years
• tolerancia de material: 0,1mm
• rebabas de material: 0,03mm
• No. de Modelo.: CTL(R)24-600 X 400
• espesor del material: 0,18-0,35mm
• anchura del material: 100-600mm
• altura del núcleo: 60-400mm
• tamaño escalonado: 0-600mm
• perforador de ranura en u.: w:25-40mm
• profundidad: 0-800mm
• tolerancia de longitud: 0,02mm/200mm
• burr. de cizallamiento: 0,02mm
• perforación de rebabas: 0,02mm
• velocidad de alimentación máxima: 200m/min
• velocidad de trabajo efectiva: 120m/min
• capacidad: 30kva
• presión del aire comprimido: 0,4-0,7mpa
• Paquete de Transporte: Standard Packing
• Especificación: 5600*5400*1900
• Marca Comercial: Senerge
• Origen: Zhejiang
• Capacidad de Producción: 30 Sets/Year

Descripción de Producto

Shunt Reactor Disk Cutting length line

A shunt reactor is a piece of electrical equipment used in high voltage power transmission systems to stabilize the voltage during load variations. A traditional shunt reactor has a fixed rating and is either connected to the transmission line all the time or switched in and out depending on the load.

A three phaseshunt reactor is generally connected to 400KV or above electrical bus system for capacitive reactive power compensation of the power system and to control dynamic over voltage occurring in the system due to load rejection.

The shunt reactor should be capable of withstanding maximum continuous operating voltage (5% higher the rated voltage in case of 400 KV system) under normal power frequency variation without exceeding the top spot temperature of 150^oC at any part of the shunt reactor.

The shunt reactor should be of gapped core type or magnetically shielded air core type. Both of these designs help to maintain the impedance of the reactor fixed. The impedance should be maintained at a constant value for avoiding harmonic current generated due to the system over voltage.

1. Shunt Reactor Cutting length Line Summary 
CTL(R)24-600 X 400 reactor disk core cutting line is used for processing large and medium size reactor core wedge stack of the core device. The equipment can automatically complete the fixed length feeding, punching and shearing, chamfering, and classification and automatic stacking at both ends.

2.Main Parameters
1)Raw material to be processed on this machine
 

1	Material	Silicon Steel
2	Material Tolerance	±0.1mm
3	Material Burrs	≤0.03mm
4	Material S Level	0.1mm≤ 1000mm
5	Material Wave Level	≤15 mm /1000mm

2)Process range
Material Thickness : 0.18~0.35mm;
Material Width : 100~600mm; 
Height of Core(H1):60~400mm;

3. Description of components 
3. 1 Double Head Decoiler  
Roll inside diameter         495--510mm
Expansion range of decoiling mandrel    470--520mm
Max width of roll           620mm
Max outside of roll          1000mm
Decoiler load-bearing        3000kg