Inicio
Directorio de Producto
Equipo y Componentes Industriales
Cojinete
Accesorios de Cojinete
Las chumaceras de rodamiento (SNl3144)
Precio FOB de Referencia: | US$ 1,2 / Pieza |
---|---|
Pedido Mínimo: | 1 Pieza |
Pedido Mínimo | Precio FOB de Referencia |
---|---|
1 Pieza | US$ 1,2/ Pieza |
Capacidad de Producción: | 500000PCS/Yr |
---|---|
Condiciones de Pago: | T/T |
Descripción de Producto
Información de la Compañía
Descripción de Producto
SKF SNL3144 bearing house
Pillow blocks bearings
Large SNL plummer block housings are the standard housings for shaft diameters from 115 mm and above. The housings are horizontally split and have four attachment bolt holes in the base. They have two eyebolts on the cap to facilitate handling.
Choice of seals
There is a choice of two standard seals for each housing and other special seals can be incorporated. End covers are also available.
Reinforced base
The housing base is reinforced with ribs and extra material surrounding the four holes for the attachment bolts in order to improve seating on the base plate. The attachment bolts can be preloaded to give better location and cannot deform the housing base or housing bore.
Good heat conduction
The reinforcement of the housing base means that there is a considerable area of contact between the base and base plate making for improved heat flow away from the bearing.
Relubrication facility
The large SNL housings have three drilled and tapped holes that are plugged by metal screws. Two of the holes are in the housing cap and one is in the side face. Two grease nipples with covers as well as one adapter with G 1/8 and G 1/4 threads are supplied with each housing. Dimples cast into the cap mark the positions for grease nipples if it is required to relubricate the seals.
Space for sensor connections
Flat areas offer space to accommodate sensors for condition monitoring. Housings with tapped holes can be supplied to order.
Caps and bases individually marked
The housing base and cap are matched during manufacture and are not interchangeable with those of other housings. To prevent mixing, the same consecutive number is marked on the cap and base of each individual housing
Easy mounting
Cap bolts are easy to unscrew. Notches to pry the cap from the base ease cap removal. The rectangular base and centring marks that are vertical to the housing bore axis simplify alignmentDimples mark the positions for dowels. Mounting instructions are also supplied with each housing
Pillow blocks bearings
Large SNL plummer block housings are the standard housings for shaft diameters from 115 mm and above. The housings are horizontally split and have four attachment bolt holes in the base. They have two eyebolts on the cap to facilitate handling.
Choice of seals
There is a choice of two standard seals for each housing and other special seals can be incorporated. End covers are also available.
Reinforced base
The housing base is reinforced with ribs and extra material surrounding the four holes for the attachment bolts in order to improve seating on the base plate. The attachment bolts can be preloaded to give better location and cannot deform the housing base or housing bore.
Good heat conduction
The reinforcement of the housing base means that there is a considerable area of contact between the base and base plate making for improved heat flow away from the bearing.
Relubrication facility
The large SNL housings have three drilled and tapped holes that are plugged by metal screws. Two of the holes are in the housing cap and one is in the side face. Two grease nipples with covers as well as one adapter with G 1/8 and G 1/4 threads are supplied with each housing. Dimples cast into the cap mark the positions for grease nipples if it is required to relubricate the seals.
Space for sensor connections
Flat areas offer space to accommodate sensors for condition monitoring. Housings with tapped holes can be supplied to order.
Caps and bases individually marked
The housing base and cap are matched during manufacture and are not interchangeable with those of other housings. To prevent mixing, the same consecutive number is marked on the cap and base of each individual housing
Easy mounting
Cap bolts are easy to unscrew. Notches to pry the cap from the base ease cap removal. The rectangular base and centring marks that are vertical to the housing bore axis simplify alignmentDimples mark the positions for dowels. Mounting instructions are also supplied with each housing
Dirección:
Xiandaicheng, Xinbei District, Changzhou, Jiangsu, China
Tipo de Negocio:
Fabricante/Fábrica, Otro
Rango de Negocios:
Maquinaria de Procesamiento, Piezas y Accesorios de Auto y de Moto, Ropa y Accesorios
Productos Principales:
Angular Contact Ball Bearing, Spherical Bearing, Bearing
Introducción de Empresa:
Giant Bearing Co., Ltd was set up in 1996 and located at Changzhou, a beautiful city in China. Our company is bearing manufacturer&bearing distributor. Since it was first established, Giant was dedicated in research, development and manufacture of bearings. Now, Giant has become main and one of the first grade suppliers of all kinds of bearings.
Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings and Trust Roller Bearings and Special Bearings. We also provide OEM beaings.
GIANT is a backbone enterprise for bearing production in China. with an area of 60, 000 square meters, more than 260 sets devices and machines, and around 200 employees, our company annually turns out more than 6 million sets bearings.
Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings and Trust Roller Bearings and Special Bearings. We also provide OEM beaings.
GIANT is a backbone enterprise for bearing production in China. with an area of 60, 000 square meters, more than 260 sets devices and machines, and around 200 employees, our company annually turns out more than 6 million sets bearings.