Air conveying chute
Air Slide System also called air slide chute or fluidizing conveying system or pneumatic conveyor system which widely used in cement industries (cement air slide conveyor), food processing industries (grain air slide conveyor, etc), energy industries and so on for the powdered or granular materials air slide conveying.
The system combined with the upper chute, air slide fabrics and lower chute. The pressed air filling from lower chute that pass through the air slide fabrics and fluidizing the dry powdered/granular materials on the upper chute then make them flowing/conveying to the lower position of the system due to the gravity so as to finish the transportation works.The fluidizing particles with less abrasion to the system, and the whole system nearly don't move when it working that make the system very durable and easy to maintenance; also the powders conveyed in the air tight chute, so they won't loss when transporting and won't cause the pollution problem as well.
Air Slide Conveyors
air slide conveyors are an efficient way of gravity conveying fine powders such as cement, fly ash, lime and many more. There are no moving parts thus maintenance is very low, an air slide conveyor is compact and uses minimal space and it furthermore it is an enclosed system that is dust tight.
An air slide essentially uses a bed of air to fluidise the material which then gravity flows along the slight decline of the conveyor. A permeable membrane separates the air chamber from the material chamber with supports preventing the aeration fabric from hanging through. Air requirements are small and at low pressures. For high temperature applications special fabric is used which allows product inlet temperatures of up to 250°C
Product Overview
Air conveying chute
Air conveying chute is suitable for conveying easily fluidized powdery materials such as cement Its working principle is to use the kinetic energy of the air flow to make the granular materials suspended, and transport them along the pipeline with the air flow. There is a breathable layer between the upper and lower tanks of the air conveying section, from the feed end to the discharge end, from high to low. It is installed at a certain oblique angle, with the material chamber above the breathable layer and the air chamber below. When gas with a certain pressure is blown into the air chamber, the material is fluidized through the breathable layer, so the material flows in the tank like a fluid under the action of gravity. A fan is usually used as the air source, because the air conveying chute is in There are no moving parts in the process of conveying materials, so compared with belt conveyors, screw conveyors, and scraper conveyors of the same power, it has less wear, easy maintenance, less power consumption, less material, no noise, and better sealing , and at the same time, it is easy to change the direction of the material flow, and can feed and unload materials at multiple points.
| Model |
Model |
Model |
200 |
250 |
315 |
400 |
500 |
| Inside width |
Inside width |
Material |
200 |
250 |
315 |
400 |
500 |
| Capacity t/h |
8º |
Cement |
22 |
40 |
70 |
130 |
220 |
| Capacity t/h |
8º |
other |
16 |
30 |
55 |
100 |
165 |
| Capacity t/h |
10º |
Cement |
40 |
65 |
120 |
250 |
400 |
| Capacity t/h |
10º |
other |
30 |
55 |
90 |
185 |
300 |
| wind pressure KPa |
2-3 |
2-3 |
2-3 |
2-3 |
2-3 |
| wind capacity m3 /min |
1.5-2 |
1.5-2 |
1.5-2 |
1.5-2 |
1.5-2 |
FEATURES AT A GLANCE
What is an air slide?
Airslides are used extensively in many industries, including mining. They convey homogenous dry powder, including minerals, for use in cement, lime and fly ash. The food industry uses airslides for flour, and many powders in the chemical industry are ideally
suited to airslides. Airslides have no moving parts.
Pneumatic Conveying System Full Process Solution Provider SDCAD
Product details
How does an air slide conveyor work?
Air Slide System Features
Compressed air is injected into the lower chamber which then permeates through the media and "fluidises" the product. The product then behaves like a fluid and "flows" down the length of the chamber while the excess air is vented to a dust collector.
What is the use of air slide?
Air Slides provide an easy and controllable method of conveying and transporting bulk powders. They are used to pneumatically
convey bulk powders from storage compartments or silos as part of some processing system.
Proveedor Auditado 
