Glue for Edge Banding Tape

• No CAS.: 24937-78-8
• Fórmula: mezcla
• EINECS: 63148-52-7
• Función Vinculación: Alta temperatura adhesivo resistente
• Morfología: Sólido
• Aplicación: Automóvil, Construcción, Carpintería, Calzado y Cuero, Fibra y Prendas de Vestir, Embalaje, cinta de bandas de bordes
• No. de Modelo.: RY290
• Material: resina eva
• Clasificación: Termofusible
• Composición Agente Principal: Inorgánica Material adhesivo
• Característica: Resistencia a la Intemperie
• Composición Promotor: Tackifier
• Composición: Inorganic material
• Color: blanco, amarillo
• cantidad de revestimiento: 10~200gsm
• temperatura de almacenamiento: 5~35 grados centígrados
• tiempo de almacenamiento: 2 años
• moq: 100kgs
• Paquete de Transporte: Paper Bag
• Especificación: 20kg or 25kg per paper bag
• Marca Comercial: ROCKY ADHESIVES
• Origen: Shanghai
• Código del HS: 3501900000
• Capacidad de Producción: 5000 Ton/Tons Per Month

Descripción de Producto

Our adhesive for woodworking and furniture, such as edge banding, profile wraping, mattress, lamination, wood splice jointing, membrance pressing.

 

Attention:

The HM adhesives should be used on any type of continuous edge banding machine.
Coating can be made either on the edge or on the section material.
The coated material is immediately placed in contact with the substrate and pressed with rolls.
(The temperature should be checked directly in the gluing system)
The supports and edges must be at ambient temperature(which should not be less than 15°C)
and the level of humidity should not exceed 10% in order to obtain a good bond.

 

APPLICATION  

Hot-melted adhesive, designed for Edge-banding application.

 

PROPERTIES   

Good melting properties

No stringing

High green strength

Good thermal stability

Good wetting properties

CONDITION

The HM adhesives should be used on any type of continuous edge banding machine.
Coating can be made either on the edge or on the section material.
The coated material is immediately placed in contact with the substrate and pressed with rolls.
Application temperature: 190-200°C
(The temperature should be checked directly in the gluing system)
Coating weight: 40-100g/M2 (Depending on edges nature and substrate)
Coating speed: 10-25m/min
The supports and edges must be at ambient temperature(which should not be less than 15°C)
and the level of humidity should not exceed 10% in order to obtain a good bond.


SUGGESTION

1 should not be mixed with any other type of adhesive.
2.The cover of glue tank should be closed lest the adhesive might be polluted.
3.If the plant line stops for over 2 hours,The glue temperature should be tuned down .

SAFETY

1.Wear goggles and adiabatic gloves when filling hopper or pot.
2.Keep plant ventilative and forbid any fire.
3.Consult MSDS and read "cautions" before used

STORAGE

24 months in its original package at an average temperature of 25°C or below. Store in a
clean, dry area. Keep containers closed. Storage temperature should not exceed 35°C.







_{PACKAGE: 25KG/BAG}