Spirulina Powder High Speed Centrifugal Spray Dryer Machine

• After-sales Service: Online Guidance
• Warranty: 5 Years
• Heating Mode: Steam or Electronic Spray Drying
• Material Status: Powder
• Type: LPG Serise
• fuente de alimentación: 380v 50hz
• No. de Modelo.: LPG-Series
• peso: 2920kg
• aplicación: industria alimentaria, química, farmacéutica
• temperatura de entrada: 140-350 controlado automáticamente
• dimensión(l*w*h): 4600*4200*7000mm
• temperatura de salida: 80-90 grados centígrados
• tasa de restauración de polvo de dreid (%): más del 95 por ciento
• estructura: rociado del secador
• método operativo: intermitente
• presión de funcionamiento: secador atmosférico
• medio de secado: vapor recalentado
• forma de movimiento: pulverización
• tipo de flujo: contraflujo
• tipo de atomización: atomización de presión
• pulverizador: centrífugo
• Paquete de Transporte: Wooden Case
• Especificación: CE, GMP, SGS, etc.
• Marca Comercial: LTPM China
• Origen: Zhejiang
• Capacidad de Producción: más del 95 por ciento

Descripción de Producto

1.   Simple Introduction:
  Spray drying is the widest used technology in the liquid shaping technology and in the drying industry. Centrifugal Atomizing (Spray) Drying Equipment is most suitable for producing powder, particles or solid block products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, spray drying is useful to create the desired particle size, residual water contents, the stocking density, and the particle shape needed to meet precise standards

2.   Working principle:
  The air is through the filter and heater, the air distributor which enters the dedicator top, the hot air takes the form of spiral and enters the dedicator evenly. The material liquid , from the material liquid trough from the at odds with the community or the leadership atomizer for the dedicator top of pump sending through the filter, make the material liquid gush out into an extremely small calorific drop, material liquid and hot air flow and keep in touch, moisture evaporate rapidly, within extremely short time dry to become finished product, finished product discharge by dry tower bottom and whirlwind separator, the waste gas is discharged by the air blower. 

Main technical Data

Item	Specification
Water Evaporation	5kg/h
Method of Atomizing	High Speed Centrifugal Atomizer (mechanical drive or stepless frequency speed regulation is available)
Revolution of atomizer(rpm)	15500
Diameter of Atomizing disc (mm)	60
Dried Powder Recovery Rate (%)	Around≥95
Length of Covered Area(m)	1.6
Width of Covered Area(m)	1.1
Height of Tower Body(m)	2.2
Hoisting height of Nozzle(m)	1.8
Air input Temp	160~200ºC
Air output Temp	70~90ºC
Tower Height	1750mm
Induce Fan Power	3 kw
Air Blower Fan Power	2 kw
Feeding pump power	1 kw
Nebulizer Power	2 kw
Vibrator air volume	1CBM/min
E-Heating Power	12 kw

Final Product