Product Description:
Low ambient and high efficiency
Lowest ambient for heating -25ºC, COP is higher than 1.62 when hot water inlet/outlet is 50ºC/55ºC, and highest outlet temp. is 60ºC.
STRUCTURE
Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
COMPRESSOR
Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators
AXIAL FAN
External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, plastic blade for low noise.
EVAPORATOR
High efficiency tank type heat exchanger, factory insulated with flexible close cell material.
CONDENSER
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, protected with flexible plastic grill.
REFRIGERANT CIRCUIT
Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, electronic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset.
The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
WATER CIRCUIT
Without water pump and expansion tank, but with paddle flow switch.
ELECTRIC PANEL
consists of:
Compressor contactor;
Compressor protection breaker;
Fan motor protection breaker;
Control circuit protection breaker;
Programmable microprocessor controller
Note: Without water pump and expansion tank, but with paddle flow switch
Proveedor Auditado 
