| Aplicación: | Transductor de Alto Rendimiento , Transductor de Fase Tres, Transductor General, Transductor Monofásico, Transductor de Alta Frecuencia |
|---|---|
| Tipo de salida: | Tres Vías |
| Principio del trabajo: | Control de Transductor de Vector |
| Switch Mode: | Control de PWM |
| Principal Tipo de circuito: | Tensión |
| Voltaje de fuente de alimentación: | Baja Tensión Drive de frecuencia variable |
Proveedores con licencias comerciales verificadas
Proveedor Auditado
| Item No. | Adaptable Motor (kW) | Input Current (A) | Output Current (A) | Rate Capacity (kVA) | W (mm) |
H (mm) |
D (mm) |
W1 (mm) |
H1 (mm) |
Diameter (mm) |
GW (kg) |
| 1 Phase Input and 3 Phase Output 220V (-15%~+15% Tolerance) | |||||||||||
| FC100E-2S-0.4G | 0.40 | 6.50 | 2.10 | 0.70 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.30 |
| FC100E-2S-0.75G | 0.75 | 8.20 | 4.00 | 1.50 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.30 |
| FC100E-2S-1.5G | 1.50 | 14.00 | 7.00 | 3.00 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.30 |
| FC100E-2S-2.2G | 2.20 | 23.00 | 9.60 | 4.00 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.30 |
| FC100E-2S-4.0G | 4.00 | 39.00 | 16.50 | 5.90 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 3.50 |
| FC100E-2S-5.5G | 5.50 | 60.00 | 25.00 | 8.50 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 5.00 |
| 3 Phase Input and 3 Phase Output 220V (-15%~+15% Tolerance) | |||||||||||
| FC100E-2T-4.0G | 4.00 | 19.00 | 16.50 | 5.90 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 4.00 |
| FC100E-2T-5.5G | 5.50 | 28.00 | 25.00 | 8.50 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 5.00 |
| FC100E-2T-7.5G | 7.50 | 35.00 | 30.00 | 11.00 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 5.20 |
| FC100E-2T-11G | 11.00 | 47.00 | 45.00 | 16.00 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 5.60 |
| 3 Phase Input and 3 Phase Output 380V (-15%~+15% Tolerance) | |||||||||||
| FC100E-4T-0.75G | 0.75 | 3.40 | 2.10 | 1.50 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.50 |
| FC100E-4T-1.5G | 1.50 | 5.00 | 3.80 | 3.00 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.50 |
| FC100E-4T-2.2G | 2.20 | 5.80 | 5.10 | 4.00 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.50 |
| FC100E-4T-4.0G | 4.00 | 10.50 | 9.00 | 5.90 | 95.00 | 180.00 | 120.00 | 83.00 | 168.00 | Ø5 | 3.50 |
| FC100E-4T-5.5G | 5.50 | 14.60 | 13.00 | 8.90 | 95.00 | 180.00 | 120.00 | 83.00 | 168.00 | Ø5 | 3.50 |
| FC100E-4T-7.5G | 7.50 | 19.00 | 17.00 | 11.00 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 4.00 |
| FC100E-4T-11G | 11.00 | 28.00 | 25.00 | 16.00 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 5.00 |
| FC100E-4T-15G | 15.00 | 35.00 | 32.00 | 21.00 | 106.50 | 240.50 | 148.00 | 96.00 | 230.00 | Ø5 | 5.20 |
| 1 Phase lnput 220V and 3 Phase Output 380V(-15%-+15% Tolerance) | |||||||||||
| FC100E-2S4T-0.75G | 0.75 | 7.50 | 2.50 | 1.50 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.50 |
| FC100E-2S4T-1.5G | 1.50 | 11.00 | 3.70 | 3.00 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.50 |
| FC100E-2S4T-2.2G | 2.20 | 15.00 | 5.00 | 4.00 | 85.00 | 142.00 | 116.00 | 73.00 | 136.00 | Ø5 | 1.50 |
| FC100E-2S4T-4.0G | 4.00 | 26.00 | 8.50 | 5.90 | 95.00 | 180.00 | 120.00 | 83.00 | 168.00 | Ø5 | 3.50 |
| FC100E-2S4T-5.5G | 5.50 | 39.00 | 13.00 | 8.90 | 95.00 | 180.00 | 120.00 | 83.00 | 168.00 | Ø5 | 3.50 |
| Electrical Specification | |
| Input Voltage | Single Phase/Three Phase 200~240V, Three Phase 380~440V Fluctuate no more than±10%,Imbalance Rate <3% |
| Input Frequency | 50/60Hz ± 5% |
| Output Voltage | 0V~Input Voltage |
| Output Frequency | Vector Control:0~300Hz V/F Control:0~3200Hz |
| Performance | |
| Overload Capacity | 150% rated output current for 1 minute, 180% rated output current for 2 seconds |
| Control Method | Open-loop vector control (SVC), V/F control |
| Run Command Setting Method | Operation Panel Setting, External Terminal Setting,Communication Setting |
| Speed Setting Method | Digital setting, analog setting/pulse setting, communication setting |
| Speed Setting Resolution | Digital setting: 0.01Hz, Analog setting: 1% X maximum frequency |
| Speed Control Accuracy | SVC:±0.5% |
| Speed Control Range | SVC:1:100 |
| Torque Control Response | SVC:<200ms |
| Starting Torque | SVC:150% rated torque/0.5Hz |
| Special Feature | |
| Programmable Input & Output Terminals | Input& Output terminal function can be edited |
| Process PID Adjustment Function | Built-in process PID module |
| Simple PLC Function | Built-in simple PLC module, which can realize timing and multi-segment frequency output |
| Textile Wobble Function | Built-in textile swing frequency function module |
| Protective function | |
| Overvoltage Stall | Bus voltage automatic control to prevent overvoltage fault |
| Automatic Current Limiting Protection | Output current is automatically limited to prevent over-current faults |
| Overload Pre-Alarm & Alarm | Overload Pre-warning and protection |
| Output Phase Loss Protection | Output phase loss automatic detection and alarm function |
| Overvoltage & Overflow Stall Control | Automatically limit current and voltage during operation to prevent frequent over-current and over-voltage tripping |
| Output Short-to-Ground Protection | Effective protection function for output short circuit to ground |
| Output Phase-to-Phase Short Circuit Protection | Output interphase short circuit effective protection function |
| Input & Output | |
| External analog power supply | +10V,load capacity 100mA |
| External digital power supply | +24V,load capacity 200mA |
| Analog Input | AI1:Voltage 0~10V/0-20mA |
| Analog Voltage Output | AOV:0~10V |
| Analog Current Output | AOI:0~20mA |
| Digital Input | DI1~DI5(DI5 can be selected as a high-speed pulse signal) |
| Digital Output | FM:FM can be selected as high-frequency pulse signal output |
| Relay output | TA/TB/TC:Contact rating 250VAC/3A or 30VDC/1A |
| MODBUS Communication | A+,B- |
| Operation Display | |
| LED Display | Set frequency, output frequency, output voltage, output current, motor speed, output torque, digital terminals, status parameters, programming menu parameters and fault codes etc. |
| Indicator Light | 3 units indicators, 3 status indicators |
| Environmental characteristics | |
| Working Temperature | -10~+40ºC, Maximum temperature is 50°C, Air Temperature change is less than 0.5°C/min,40~50ºC Derating is required, output current derating 2% for each 1ºC |
| Storage Environment Temperature | -40~+70ºC |
| Application | Indoor, free from direct sunlight, dust, corrosive gas, flammable gas, oil mist, water vapor, dripping water or salt etc. |
| Altitude | Less than 1000 meters, derating is required for more than 1000 meters |
| Humidity | Less than 95%RH, no condensation |
| Vibration resistance | 3.5m/s² at 2~9Hz, 10m/s² at 9~200Hz (IEC60721-3-3) |
| Protection Degree | IP20 |
| Pollution Level | Class 2 (dry, non-conductive dust pollution) |
| Certification | |
| CE | The whole series has passed CE certification |
| Optional accessories | |
| Keypad | The whole series supports external keyboard through standard network cable |
Proveedores con licencias comerciales verificadas
Proveedor Auditado 
