Proveedores con licencias comerciales verificadas
Proveedor Auditado
| normal pressure | 1.6MPa/2.5MPa/4.0MPa | the lowest super-cold degree | <2ºC |
| the highest back pressure rate | 90% | normal diameter | 20~50mm |
| rate of load steam loss | <3% | working pressure range | 0.01-1.6MPa |
| tested pressure of body | 2.4MPa-6.0MPa | the highest permission temperature | 420ºC |
| the highest working temperature | 350ºC | valve body valve dock | WCB/QT450/CF8 |
| floating ball,lever | stainless steel | Automatic air exhaust | hard chrome steel/stainless steel |
(1)Q: How does a steam trap work?
A: The trap opens and closes automatically based on the pressure difference of the fluid. When the pressure in a pipe or equipment exceeds a preset limit, the trap opens, allowing water or condensate to drain from the system; when the pressure drops below the set value, the trap closes, preventing fluid from the system. drain.
(2)Q: What is the main purpose of a steam trap?
A: Traps are mainly used to remove condensation water from pipes or equipment to avoid damage to the system. They are usually widely used in steam systems, air compressors, cooling towers and other industrial equipment.
(3)Q: What are the common types of steam traps?
A: Common trap types include float traps, funnel traps, instantaneous traps and turbine traps, etc. Each type of trap has its own characteristics and scope of application.
(4)Q: How to choose a suitable trap?
A: When choosing a suitable trap, you need to consider factors such as the operating pressure, flow rate, media type and temperature of the system. In addition, the appropriate trap must be selected based on the size and installation requirements of the equipment.
(5)Q: How to maintain and maintain steam traps?
A: Maintenance and maintenance of steam traps include regular inspection, cleaning and lubrication. Regular inspections can ensure that traps are functioning properly and avoid clogging. Cleaning and lubrication can extend the life of your trap and improve its performance.
(6)Q: Do steam traps need to be replaced regularly?
A: Yes, steam traps typically require periodic replacement to ensure they operate effectively. Depending on usage and manufacturer's recommendations, it is generally recommended to replace traps annually or more frequently.
(7)Q: What are the common failures and solutions for steam traps?
A: Common trap failures include water leakage, blockage, and failure to open. Solutions to these problems may include cleaning, replacing the seals, or replacing the entire trap.
(8)Q: Can the trap be installed by myself?
A: The installation of steam traps usually requires professionals because factors such as the installation location of the pipe, flow direction, and fluid characteristics need to be considered. If you do not have the relevant knowledge and skills, it is best to ask professionals to install it.
Proveedores con licencias comerciales verificadas
Proveedor Auditado 
