Estándar o no estándar: | Estándar |
---|---|
eje del agujero: | 2-32 |
Esfuerzo de torsión: | 0.3-20 |
Diámetro del agujero: | 2-32 |
Velocidad: | 8000-30000 |
Estructura: | Flexible |
Proveedores con licencias comerciales verificadas
El parámetro modelo | Diámetro del orificio común d1,d2 | ΦD | L | L1 | L2 | F | M | Apretar el tornillo de apriete (N.m) |
GM-12xl8.5 | 2,3,4,5,6,6.35 | 12 | 18.5 | 1.8 | 0.4 | 3.5 | M3 | 0.7 |
GM-15.5x21 | 3,4,5,6,6.35,7 | 15.5 | 21 | 2 | 0.4 | 3.3 | M3 | 0.7 |
GM-15.5x23 | 3,4,5,6,6.35,7 | 15.5 | 23 | 2 | 0.4 | 3.6 | M3 | 0.7 |
GM-19.1x19.1 | 4,5,6,6.35,7,8 | 17.5 | 23 | 2 | 0.4 | 3.6 | M4 | 1.7 |
GM-17.5x23 | 4,5,6,6.35,7,8,10 | 19.1 | 19.1 | 2 | 0.4 | 3 | M4 | 1.7 |
GM-19.5x24,5 | 6,6.35 7,8,9,9.525,,10 | 19.5 | 24.5 | 2 | 0.4 | 3.3 | M4 | 1.7 |
GM-25x32 | 5,6,6.35,7,8,9,9.525,10,11,12,12.7 | 25 | 32 | 2 | 0.4 | 3.7 | M4 | 1.7 |
-25.4x25.4 mm | 6,6.35,7,8,9,9.525,10,11,12,12.7 | 25.4 | 25.4 | 2 | 0.4 | 3.7 | M4 | 1.7 |
GM-28.6x28.6 | 8,9,9.525,10,11,12,12.7,14 | 28.6 | 28.6 | 2.75 | 0.4 | 4.2. | M4 | 1.7 |
GM-32x32 | 8,9,9.525,10,11,12,12.7,14,15,16,17,18 | 32 | 32 | 2.75 | 0.4 | 5.5 | M4 | 1.7 |
GM-32x41 | 8,9,9.525,10,11,12,12.7,14,15,16,17,18 | 32 | 41 | 2.75 | 0.4 | 6.8 | M4 | 1.7 |
-38.7x38.1 mm | 14,15,16,17,18,19,20,22 8,10,11,12,12.7, | 38.1 | 38.1 | 3 | 0.4 | 5.2 | M5 | 4 |
GM-42x50 | 12,12.7,14,15,16,17,18,19,20,22,24,25,28 | 42 | 50 | 3.5 | 0.4 | 8.5 | M6 | 7 |
GM-50x50 | 12,12.7,14,15,16,17,18,19,20,22,24,25,28,30,32 | 50 | 50 | 3.5 | 0.5 | 8.5 | M6 | 7 |
El parámetro modelo | El par nominal (N.m)*. |
La excentricidad permitida (Mm)*. |
Ángulo de desviación admisible (°)*. |
Desviación axial permisible (Mm)*. |
La máxima velocidad R/min. |
Rigidez torsional estática (N.M/rad) |
Momento de inercia (Kg.m2) |
Material de la camisa del eje | Tratamiento de superficie | El peso (G) |
GM-12xl8.5 | 0.3 | 0.15 | 3 | ± 0,2 | 30000 | 40 | 8,0X10-7 | Aleación de aluminio de alta resistencia | Tratamiento de anodización | 4 |
GM-15.5x21 | 0.5 | 0.15 | 3 | ± 0,2 | 25000 | 80 | 2,8 veces mayor10-7 | 7.7 | ||
GM-15.5x23 | 0.5 | 0.15 | 3 | ± 0,2 | 25000 | 50 | 2,9X10-7 | 9.3 | ||
GM-17.5x23 | 0.6 | 0.15 | 3 | ± 0,2 | 25000 | 85 | 3.5X10-7 | 12.7 | ||
GM-19.1x19.1 | 0.9 | 0.15 | 3 | ± 0,2 | 24000 | 130 | 7.2X10-7 | 11.6 | ||
GM-19.5x24,5 | 1 | 0.15 | 3 | ± 0,2 | 19000 | 150 | 8.1X10-7 | 16 | ||
GM-25x32 | 2 | 0.15 | 3 | ± 0,2 | 15000 | 300 | 3.5X10-7 | 32 | ||
-25.4x25.4 mm | 2 | 0.15 | 3 | ± 0,2 | 14000 | 360 | 2,3X10-6 | 26 | ||
GM-28.6x28.6 | 2 | 0.15 | 3 | ± 0,2 | 14000 | 380 | 2,3X10-6 | 39 | ||
GM-32x32 | 3 | 0.15 | 3 | ± 0,2 | 13000 | 380 | 2.5X10-6 | 57 | ||
GM-32x41 | 4 | 0.15 | 3 | ± 0,2 | 12000 | 450 | 9.6X10-6 | 65 | ||
-38.7x38.1 mm | 6.5 | 0.15 | 3 | ± 0,2 | 9500 | 400 | 2,7X10-5 | 97 | ||
GM-42x50 | 8 | 0.15 | 3 | ± 0,2 | 9000 | 500 | 7.2X10-3 | 185 | ||
GM-50x50 | 20 | 0.15 | 3 | ± 0,2 | 8000 | 785 | 8.1X10-5 | 220 |
Proveedores con licencias comerciales verificadas