2.0ml 96 Placa de pozo profundo redonda, con fondo en forma de U / V

• Bien Cantidad: 96
• Bien Forma: Redondo
• Forma inferior: Forma de U
• No. de Modelo.: 02-1322
• Color: Claro
• volumen: 1,0ml/ 1,6ml/ 2,2ml/ 0,5ml/ 10ml
• descripción: pozo redondo/ pozo cuadrado
• desechable: desechable
• certificación: ce, iso, fda
• material: pp
• Paquete de Transporte: 10 piezas/paquete, 100 piezas/caja
• Especificación: ce iso fda
• Marca Comercial: biologix
• Origen: Changzhou Jiangsu China
• Código del HS: 3917220000
• Capacidad de Producción: 200cases/ mes

Descripción de Producto

1.0ml 1.6ml 2.2ml 0.5ml 10ml V U 24-well 96-well Sterile Deep Well Plates

 

Characteristic:

1. Made of high quality medical grade polypropylene; chemically resistant to alcohols and mild organic solvents.
2. Sterilization, individual wrap and lid optional.
3. 10ml, 2.2ml, 1.6ml, 1.0ml, 0.5ml, U bottom and V bottom available.
4. Can be sealed with sealing film or silicone covers.
5. Conform to SBS standards; compatible with automated DNA extraction equipment.
6. 96-well magnet set and 8-strip magnet set.

Ordering Information:
  

Cat#	Well	Volume	Bottom	Sterile	Cap	Unit
02-9010	24 wells, square	10ml	V	No	No	5 /Bag, 50 / Case
02-9110	24 wells, square	10ml	V	Yes	No	5 /Bag, 50 / Case
02-9210	24 wells, square	10ml	V	Yes	No	5 /Bag, 50 / Case
02-9310	24 wells, square	10ml	V	Yes	Yes	5 /Bag, 50 / Case
02-1022	96 wells, square	2.2ml	U	No	No	24 /Bag, 96 / Case
02-1022	96 wells, square	2.2ml	U	No	No	24 /Bag, 96 / Case
02-1122	96 wells, square	2.2ml	U	Yes	No	24 /Bag, 96 / Case
02-1222	96 wells, square	2.2ml	U	No	Yes	24 /Bag, 96 / Case
02-1322	96 wells, square	2.2ml	U	Yes	Yes	24 /Bag, 96 / Case
02-6022	96 wells, square	2.2ml	U (Profile Concave)	No	No	24 /Bag, 96 / Case
02-6122	96 wells, square	2.2ml	U (Profile Concave)	Yes	No	24 /Bag, 96 / Case
02-6222	96 wells, square	2.2ml	U (Profile Concave)	No	Yes	24 /Bag, 96 / Case
02-6322	96 wells, square	2.2ml	U (Profile Concave)	Yes	Yes	24 /Bag, 96 / Case
02-7022	96 wells, square	2.2ml	V	No	No	10 /Bag, 50 / Case
02-7122	96 wells, square	2.2ml	V	Yes	No	10 /Bag, 50 / Case
02-7222	96 wells, square	2.2ml	V	No	Yes	10 /Bag, 50 / Case
02-7322	96 wells, square	2.2ml	V	Yes	Yes	10 /Bag, 50 / Case
02-1016	96 wells, square	1.6ml	U	No	No	24 /Bag, 96 / Case
02-1116	96 wells, square	1.6ml	U	Yes	No	24 /Bag, 96 / Case
02-1216	96 wells, square	1.6ml	U	No	Yes	24 /Bag, 96 / Case
02-1316	96 wells, square	1.6ml	U	Yes	Yes	24 /Bag, 96 / Case
02-2010	96 wells, round	1.0ml	U	No	No	24 /Bag, 96 / Case
02-2110	96 wells, round	1.0ml	U	Yes	No	24 /Bag, 96 / Case
02-2210	96 wells, round	1.0ml	U	No	Yes	24 /Bag, 96 / Case
02-2310	96 wells, round	1.0ml	U	Yes	Yes	24 /Bag, 96 / Case
02-8005	96 wells, square	0.5ml	V	No	No	10 /Bag, 100 / Case
02-8105	96 wells, square	0.5ml	V	Yes	No	10 /Bag, 100 / Case
02-8205	96 wells, square	0.5ml	V	No	Yes	10 /Bag, 100 / Case
02-8305	96 wells, square	0.5ml	V	Yes	No	10 /Bag, 100 / Case
02-0096	96-well magnet set, non-sterile					2 /Bag, 50 / Case
02-0196	96-well magnet set, sterile					2 /Bag, 50 / Case
02-0008	8-strip magnet set					2 /Bag, 100 / Case

1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.


2. What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products

3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.