Engine Coolant Water Level Sensor 3408627 3048728 3056353 4327017 3408626 2399957 239-9957 Pressure Switch Gp Position 266-1477 2661477 3048728 4327017 for Cat

• Condiciones de Uso: Tipo de carro, Tipo de remolque, Marina, Uso del suelo
• Uso: Equipo de Emergencia, Unidad de espera, Unidades Comunes
• Tipo de salida: Trifásico AC
• Método de enfriamiento: Refrigeración por agua
• Metodo de instalacion: Portátil
• Tipo Generador: Generador de diesel
• No. de Modelo.: CAT yaw rate sensor acceleration sensor 333-8538
• Paquete de Transporte: Carton Case
• Especificación: 13.8*4.2*3.5cm
• Marca Comercial: Baishan Power
• Origen: China
• Código del HS: 8503003000
• Capacidad de Producción: 1000pieces/Year

Descripción de Producto

*The magnetic speed sensor indicates when ring geat teeth, or other ferrous projections, pass the tip of the sensor.

*Electrical impulses are induced within the coil and sent to the speed control unit.

*The signal from the magnetic speed sensor, teeth per second(HZ), is directly proportional to engine speed. The

 magnetic speed sensor is mounted in the ring gear case or fly wheel bell housing of the engine.

*The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth.

*A spot face should be present to provide a flast surface on which to anchor the locknut.

*With the engine stopped, screw the speed sensor in until it touches a gear tooth, then back it out 0.75 of a turn and secure it with the locknut.

*Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications.

*The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.

*The leads may need shielding if they are longer than 10 ft(3m), or if external interferenceis present.

Do not connect either of the speed sensor leads to anything but the speed control unit used. The shield should not be connected at the speed sensor end.

Item       Pickup Length    Thread Length       Lead Length           Thread Size            Drill Size
MSP675     3.125"                 2.75"                      7.00"                 5/8-18 UNF-2A         37/64
MSP676      5.0"                    4.625"                    12.00"               5/8-18 UNF-2A         37/64

 

Magnetic Speed Sensors are with Wire Leads 

Picu up MSP675  5/8-18UNF-2A

Picu up MSP676  5/8-18UNF-2A

Picu up MSP677  5/8-18UNF-2A

Picu up MSP678  5/8-18UNF-2A

Picu up MSP6729 3/8-24UNF-2A

Picu up MSP6719 5/8-18UNF-2A

Picu up MSP6714 M16x1.5

Picu up MSP6724 3/4-16 UNF

pick up 3034572  5/8-18UNF-2A

 

Packing & Delivery

 
Packing  : Standard export packing, each packed into box then to big carton

 

1. Shock bubble film                                       2. Suitable goods placing                      3. Special logistics packaging

Our Company



 

Contacts

Candy Yang(Ms)

 
 
 
 

FAQ

Q: Is our company a trade company or factory?
A: We are manufacturer, we have own factory for AVR, SENSORS, RECTIFIER, CONTROLLER,MOTOR AND GENERATOR SPARE PARTS. This is certified by Made-in-China and our showed photos can prove it. Also we can say we are the International sales department for these products and charge all the business of these products.
 

Q: Are the products original ?
A: Most the goods are replaced type made in china, but can 100% replaced the original one with reliable performance.Except the model marked ORIGINAL.
 

Q: Can you provide the free sample?
A: Usually we didint provide the free sample.But can apply some free sample according to your company qualification.But freight cost should be paid by customer.