WASP V3 250 RTF de FP de 4ch versión sin escobillas de los controladores de la correa de 11,1V 900mah Li-Po)

This model is designed with German know-how. It can be flown easily near the ground, and is highly damage-resistant. It has been designed to allow people to learn to fly before moving to the next very expensive models. The WASP V3´s light and handy design fits for the beginners due to small body and good stability. Expert pilots will also enjoy this model however, because it can be operated in small rooms, garages etc.

Product included
Wasp V3 FP SE helicopter; 18A brushless speed controller; Head locked gyro; Three servos; 4500kv brushless motor; Sky701 7CH TX/RX, 11.1V 900mah LI-PO battery and balance charger; USB and Flight simulator

Feature
7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set
High Performance 4500KV out runner Brushless Motor used as the main drive and makes the flight much stable and better performance
Can fly in skyway, backward, and 3D aerobatic
Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing Bell-Heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
Hard, Light weight ABS Blades
Brand new design for the structure
Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
Tail rotor driven by belt provide stable flight and low noise
NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter
No need to worry about burning tail motors
Outer placed Head Lock Gyro
11.1V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight
With length-adjustable servo push-rod, precision sub trim can be easily set
Separate main shaft and main gear reduce repair time and noise
Weight is a key to an EP helicopter; Lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
Easy to fly and more stable lifting
PPM receiving and transmitting system increases the operation stability
PPM mode with adjustable pitch system and 3D conversion
Provide excellent performance outdoor and indoor
Tail blade adopt flameout landing system
Newly Designed Rotor Head gives better control
Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
Extreme smooth control and stable flight
Precise controlling and hovering
Digital Proportional Motor Speed Control
Suitable for Indoor/Outdoor/Backyard/Stadium
Using the Ultra tough Aluminum Alloy materials, the Helicopter does have very strong structure. In addition, the main rotor blades are using top quality ABS Blades, which is extremely light and not easily break
Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
Best choice for Beginner - Advanced hobbyist
All spare parts and accessories are available
Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)

Specification:
Main Rotor Diameter: 440mm (17.3 inch)
Tail Rotor Diameter: 130mm (5.1 inch)
Length: 455mm (18 inch)
Flying Weight: 330g (Battery included)
Driven system: Skyartec 4500KV brushless motor
Gyro: Skyartec Head Lock
Servo: 2X Skyartec 9g, 1X skyartec 5g
ESC: Skyartec 18A
Battery: Skyartec 11.1V 900mAh Lithium Li-Po
Control system: Skyartec 7CH PPM Multifunctional FM Transmitter & Receiver
Radio Control Range: 2500 feet (762m)