Proveedores con licencias comerciales verificadas
AC 220V 2-Ch Remote Control Switch KL-K210X
User Manual & Tech data
Operation Method:
1. Match code:
Hold learning button and learning indicator light blinks, then press a buttons of remote control, if indicator lights flashes 3 times, match code successfully. Maximum 20 remote controls can be matched.
2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.
3. Set working mode:
S1 & S2 program the sequence as follows:
Jumper on S1→ Toggle
Jumper on S2→ Latching
No Jumper on S1 &S2→ Momentary
Tech Data:
AC 220V 2-Ch Remote Control Switch KL-K210X
Input | AC220V (AC110V is customized) |
Channels | 2 |
Working Current | 3mA |
Working Frequency | 433MHz / 315MHz (other frequency is customized) |
Receiver Sensitivity | -103dBm |
Decoding Type | Learning Code(EV1527), Fixed Code(PT2262) |
Output Mode | Switching Signal (Dry Contact) / Active Switching Signal (Wet Contact) |
Working Mode | Momentary / Toggle / Latching |
Max Load | 6A (Relay Contact, 3A of Each Channel) |
Dimension | 115*45*27mm |
Working Mode:
1. Non-lock/Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Self-lock/Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Inter lock/Latching: Press remote button A, the relay A is on, B is off; press button B, the replay B is on, A is off.
Wiring Way & Diagram:
B=Normally Closed, K=Normally Open, G=Common.
Please refer to below diagram as wiring for 2 different output modes:
1) Express: DHL, FedEx, UPS, TNT, EMS, etc.
2) By air
3) By sea
4) By special line
Depends on buyer's requirement.
Proveedores con licencias comerciales verificadas