Our Team Will Make The Best Product Solution For Your Project.Please Contact Us
Pole mounted Transformer has obtained multiple certifications and its product quality is favored by customers.
If your order quantity is large, we can customize the certificate for you need certificate.
We have an office in Houston, USA. Welcome to consult us.
Transformers Cores Matericals,we can customized two kinds of : Amorphous Alloy Cores or Silicon Steel Cores.
Power Transformers Coil Matericals,we also can customized two kinds of : Copper Coil or Aluminum Coil.
and There are more technologies to meet your needs.
I hope recive you massage.
Why i can say this information about custom Power transformer,Distribution transformer,Subtation transformer,Special transformer?
Because our factoy have more than 300 engineering and technical personnel,more than 1200 employees,covering an area of 240000 square meters.
Of course, our prices are reasonable and cheap, guaranteed to fit your purchasing plan.Dont't worry you plan.
We very much welcome all future partners to visit our factory and office.
Believe in the quality of our products.
Our products are mainly supplied to large national enterprises in China: State Grid, China Southern Power Grid, China Railway, various types of hydropower stations, wind power stations, photovoltaic power stations, etc. Customers can be assured of product quality.
We also cooperate with large companies abroad. For example, ENERGOMAX LLC, GREENS LTD, UZTRANSFORMERLLC, Meta Power Solutions,CENTURY ENGINEERING CONTRACTOR LTD.,MALAYSIA PHASE 2 POWER STATION PROJECT,ETC.
Pole Transformer single-phase transformers have successful exports to the United States, Canada, Honduras, Guyana, Venezuela, Cameroon, Philippines, and other countries. With over 15 years of expertise, Power Pole Transformer excels in manufacturing ANSI/IEEE/UL transformers, demonstrating remarkable professionalism and proficiency in the North and South American markets. They offer Pole Distribution Transformer single-phase pole-mounted transformers, which can be designed, produced, and customized to meet various international standards. Pole Mounted Distribution Transformer commitment to excellence makes them a reliable partner for all transformer requirements in the Americas and beyond.
The 25 kVA single-phase pole-mounted transformer employs high-quality aluminum winding material for both its high and low-voltage sections, ensuring superior performance and reliability. With an impedance value of 2%, it features a Vector group of Ii0 and polarity that is Subtractive, enhancing its efficiency.
The transformer's high voltage with five distinct levels of voltage regulation, provides outstanding versatility, while the voltage regulation range of 19.92kV±2×2.5% ensures steadfast stability even during fluctuations.
1.support lug
2.tap changer
3.lifting lugs
4.LV bushing
5.HV bushing
6.ground connector
7.pressure relief
8.cover clamp
9.tank ground
Single Phase Pole Mounted Transformer Core
The core is beveled and stepped for maximum performance and minimal bulk. After the magnetic steel is produced by the cutting machine, it is continuously cut into specific lengths by the automatic stacking machine, and then automatically stacked. The correct size is ensured during the entire stacking and assembly process to ensure the high quality of the product.
Pole Mounted Transformer Manufacturers Winding
The low voltage winding adopts the whole section of copper foil, which is wound on the special low-voltage foil winding machine with the F-grade insulation. The foil coil solves the outstanding problems such as low voltage, high current coil winding, high short-circuit stress, unbalanced ampere turns, poor heat dissipation effect, windingspiral angle, unstable manual welding quality and so on. At the same tim-e, the winding ends of our company aresealed with resin, cured and formed, moisture-proof and antifouling. The lead copper bar is automatically welded byargon arc welding.
Single Phase Pole Transformer Standards
IEEE Std C57.12.00™-2000 standard - IEEE Standard for Standard General Requirements for
Liquid-Immersed Distribution, Power, and Regulating Transformers
IEEE Std C57.12.20™-2005 standard - IEEE Standard for Overhead-Type Distribution Transformers, 500kVA
and Smaller: High Voltage, 34500V and Below; Low Voltage, 7970/13800Y V and below
IEEE Std C57.12.31™-2010 standard - IEEE Standard for Pole Mounted Equipment - Enclosure Integrity
IEEE Std C57.12.35™-1996 standard - IEEE Standard for Bar Coding for Distribution Transformers
IEEE Std C57.12.90™-2006 standard - IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and
Regulating Transformers
IEEE Std C57.12.91™-2001 standard - IEEE Guide for Loading Mineral-Oil-Immersed Transformers
IEEE Std C57.154™-2012 standard (Pending Approval)- IEEE Standard for the Design, Testing and Application
of Liquid-Immersed Distribution, Power and Regulated Transformers using High-Temperature
Insulation Systems and Operating at Elevated Temperatures
(ASTM)American Society for Testing Materials
NEMA TR 1-1993 (R2000) - Transformers, Regulators and Reactors, Table 0-2 Audible Sound Levels
10 CFR Part 431 - Department of Energy - Energy Conservation Program for Commercial Equipment:
Distribution Transformers Energy Conservation Standards; Final Rule
Transformer Test
Transformer ratio and connection
Measurement of load losses and short circuit impedance.
Measurement of no-load losses.
Separate source withstand voltage test
Induced over-voltage test
Temperature rise test
Lighting impulse withstand voltage test
Measurement of partial discharge
Other transformers like rectifier transformer are also available on request.
Quality System ISO 9001 certified.
Paint system meeting or exceeding the performance of the IEEEC57.12.28 Standard including the salt spray test.
Computer aided design for mechanical & electrical calculations (C.A.D.).
Core and coils designed for an optimum Total Ownership Cost (TOC).
Low voltage leads with embossed markings on all units with 3 L V bushings for easy reading and permanent identification on selected ratings.
Provision for surge arrester bracket,bracket available as an option.
"Low-high-low"windings for increased short circuit stren-gth,efficiency and thermal strength
Cover or sidewall mounted high voltage bushing(s)as required.
Wound core with step-lap joints for increased efficiency and lower noise levels.
Dual voltage designed to meet BIL and short circuit requirements on both connections.
Automatic self-resealing pressure relief valve.
Low voltage spade or clamp type(basket)terminals as required.
Multiple cover clamps to ensure proper sealing and to minimize water retention on the cover edge.
Rated capacity |
Voltage ratio |
Vector group |
No-load losses(kw) |
Impedance |
10kva |
110v/220v/400v/3kv |
Dyn11/Yd11/Yyn0 |
0.08 |
4% |
50kva |
380v/3kv/6kv/11kv/33kv |
Dyn11/Yd11/Yyn0 |
0.13 |
4% |
100kva |
380v/3kv/6kv/11kv/33kv |
Dyn11/Yd11/Yyn0 |
0.2 |
4% |
200kva |
380v/3kv/6kv/11kv/33kv |
Dyn11/Yd11/Yyn0 |
0.34 |
4% |
500kva |
380v/3kv/6kv/11kv/33kv |
Dyn11/Yd11/Yyn0 |
0.68 |
4% |
1000kva |
380v/3kv/6kv/11kv/33kv |
Dyn11/Yd11/Yyn0 |
1.15 |
4.5% |
2500kva |
380v/3kv/6kv/11kv/33kv |
Dyn11/Yd11/Yyn0 |
2.31 |
4.5% |
3.5mva |
380v/3kv/6kv/11kv/33kv |
Dyn11/Yd11/Yyn0 |
2.73 |
4.5% |
24mva |
11kv/35kv/69kv/110kv/220kv/400kv |
Dyn11/Yd11/Yyn0 |
|
|
100mva |
11kv/35kv/69kv/110kv/220kv/400kv |
Dyn11/Yd11/Yyn0 |
|
|
Our company has a relatively strong production capacity and efficient marketing team.Products include 110KV,220KV large ultra-high voltage transformers and 35KV below various dry transformers,oil-immersed transformers,amorphous alloy transformers,pre-installed substation and various specifications of box transformer,furnace transformer,rectifier transformer,mining transformer and other special transformers.All products of the company have passed the routine,type and special tests of the National Transformer Quality Supervision and inspection Center and wuhan High Voltage Research Institute of the State Electric Power Corporation.The enterprise has passed IS09001:2015 quality management system certification;Jiangsu province enterprise measurement certification;At the same time,10KV,35KV class power transformers,box substation and the adoption of IEC certification.Product sales cover the national market,but also exported to Australia,New Zealand,India,Madagascar,Vietnam and other countries and regions.
Transformer for On-site installation
1.Who are we?
We are transformer company, based in Jiangsu, China, start from 2007,sell to Domestic Market(80.00%),Southeast Asia(20.00%). There are all about 1200-1500 people in our company.
2.How can we guarantee quality?
Always make a final Inspection before shipping.
3.What can you buy from us?
110kV-220kV Oil-immersed Power Transformer,Dry-type Transformer,Unpacked H Grade Dry Transformer,Oil-immersed Distribution Transformer, Pad-mounted Transformer,Enameled Wire,Composite Wire,Transposed Wire,Paper Covered Wire,Film Wrapped Wire.
4.Why should you buy from us not from other suppliers?
As an enterprise specializing in transformer production for 31 years, we have high quality, fast delivery, guarantee after-sales service and factory price. What's more, we have ISO9001-2008, OHSAS 18001:2007, ISO4001:2004L ,UL ,CE certificates and IEC, ANSI, KEMA, GOST standard.
5.What services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW; Accepted Payment Currency:USD,CNY; Accepted Payment Type: T/T,L/C; Language Spoken:English,Chinese.