Manipulador de soldadura de tubos / Manipulador de soldadura / Columna de soldadura y Boom

• Aplicación: Soldadura
• modelo: Nhcz-1515
• entrada de alimentación: 3pH 380V AC 50/60Hz
• itinerario de elevación de vigas: 1400mm
• itinerario de tramo de viga: 1300mm
• velocidad de elevación del haz: 700mm/Min
• No. de Modelo.: NHCZ-1515
• velocidad de estiramiento del haz: 200-1500mm/Min
• modo de conducción del haz: motor inversor + husillo de bolas
• itinerario de ajuste preciso a nivel de cabeza: 100mm
• itinerario vertical de ajuste preciso: 100mm
• modo de ajuste de cabezal: ajuste eléctrico
• Paquete de Transporte: Free Fumigation Wooden Cases
• Especificación: CE
• Marca Comercial: North
• Origen: Jinan Shandong
• Código del HS: 8456901000
• Capacidad de Producción: 1000set /Month

Descripción de Producto

Pipe Welding Manipulator/ Welding Manipulator/Welding Column and Boom (1)Welding manipulator are used for the inside and outside circumferential and longitudinal welding. (2)It mainly consists of column, boom, pedestal,ladder,electrical equipmet and hand control box. We also offer welding hea d and flux recovery system if customer require. (2)There are three types for you to choose. Fixed type, Fixed with rotation type, movable type. (3)Column can do both retracting (left and right) and lifting(up and down) movement to meet weld need. (4)The speed of retracting are adjusted by Frequency Conversion Speed Control(VFD). It is precise and stable. (5)Movable type cab be used with track together, to facilitate operation. (6)Column and boom are often used with welding rotator and positioner together. (as show in following picture) (7)Welding head and Flux recovery system are offered (8)Hand-control box is offered to facilitate operation (9)There is safty device.  Pipe Welding Manipulator/ Welding Manipulator/Welding Column and Boom   This welding manipulator can be used in match with automatic welder, welding rotator (roller stand) or welding positioner (turing table), and for the inside and outside circumferential and longitudinal welding. It is also applicable to automatic welding

Model	NHCZ-1515
Power Input	3ph 380V AC 50/60Hz
Beam Lift Itinerary	1400mm
Beam Stretch Itinerary	1300mm
Beam Lift Speed	700mm/Min
Beam Stretch Speed	200-1500mm/Min
Beam Drive Mode	Inverter Motor +Ball Screw Drive
Head Level Fine-tuning Itinerary	100mm
Head Vertical Fine-tuning Itinerary	100mm
Head Adjustment Mode	Electrically Adjust
Control Mode	Hand Control Box Control
H*L* B Over Dimension H*L*B	2300*2200*620mm